Skip to content

Setting brew temperature: what the manual says

Last checked November 18, 2026

Changing the set temperature takes a few button presses, but the steps and the allowed range belong to your maker. Here's what one maker's manual says, so you know what to look for in yours.

One maker's steps

This is the manual for one machine with a PID display. It says the "default temperature will be set to 93C or 200F".1

To change it, the manual says to "press and release the left PID button". The display then reads PrG. You press the right button to view the set temperature, then use the left and right buttons to raise or lower it.1

Changing the set temperaturePress the PID buttonDisplay shows the program modeRaise or lower the set valueWait for normal operation
The pattern in one maker's manual. Yours will differ.

If you stop pressing buttons, the manual says "the PID will revert back to normal operation". So there's no separate save step described for this model.1

What range does the maker give?

The same manual says "the recommended brewing temperature is between 194 and 205 F". That's one maker's range for one machine.1

Another maker might give a different range, a different default, or steps in Celsius. The same manual even has a separate advanced menu for changing the temperature unit. A figure from one machine shouldn't be copied onto another.1

Notice that the manual gives both Celsius and Fahrenheit for its default, and Fahrenheit alone for its range. If your display is in the other unit, convert with care, and check what your own manual says before you change anything.

What to look up in your manual
Default setting The temperature the machine ships with
How to enter the menu Which button, and what the display shows
Allowed range The lowest and highest value the maker gives
Step size Whether it moves by whole degrees or fractions
Units Celsius or Fahrenheit, and how to switch

Why the manual, and not a forum post

Settings change what the machine does. Menus differ by model. A button sequence that works on one machine could do something else on another.

A forum post may be honest and still wrong for you. It describes someone else's machine, maybe an older version, maybe a different layout. The manual describes yours. That's the whole reason to start there.

Wikipedia describes a PID as something that "automatically compares the desired target value" with the measured value.2

If your manual gives no range, or you can't find it, try the maker's support page. Guessing from another model is the worst option.

Leave the deeper menus alone

The same manual has an advanced PID menu. It says the PID comes with its settings already adjusted and suggests entering the advanced menu only to switch the temperature unit.1

Don't open the case. Electrical repairs go to the maker or a qualified technician, never to a home fix.

The set number and the water in the cup can differ. This next page explains why.

Cited material

  1. LUCCA Solo: User Manual, Clive Coffee Help Center
  2. Proportional–integral–derivative controller, Wikipedia